When calculating how long does a propane tank last on a patio heater, we need to take the efficiency of the patio heater into account.
We know that 20 lb holds , BTU of useful energy. Example: We can quite easily calculate how long will a 30, BTU patio heater last on a 20 lb propane tank like this;. In short, a propane tank for a 30, BTU outdoor patio heater lasts for 12 hours and 37 minutes.
We can calculate this time for patio heaters of any BTU capacity. The LGP gas cylinder must be in good condition with no sign of damage , i. Check the valve is a good connection to the regulator. If your LPG gas cylinder is in poor condition return it to your local supply depot and exchange for a replacement cylinder. To store a patio heater over winter remove the reflector by removing the wing nuts holding the reflector.
Lift the reflector off and store in a safe place. With the reflector removed the patio heater footprint is reduced to 46cm to allow for easy storage in a garage or garden shed. Never store a propane gas cylinder indoors or below ground level. Find A Local Dealer. When cold, they keep the gas valve shut. When the flame is lit, the thermocouple quickly heats up and keeps the valve open. As soon as the flame is extinguished, the thermocouple will go cold and automatically close the valve.
Thermocouples are also known as flame failure devices. Safe Use Gas patio heaters can only become dangerous if used in an irresponsible manner.
To prevent accidents, make sure you follow all instructions provided in your patio heater manual. It is particularly important to check for leaks when assembling the heater and attaching the cylinder for the first time.
This is quick and easy to do with a soapy water solution. Any gas leaks will be made obvious by bubbles forming in the solution. Never leave a burning patio heater unattended and do not use in high winds. Never use a gas patio heater inside, or in a covered or poorly-ventilated area. This means they are suitable for use underneath some outdoor structures, but only if the structure has been designated suitable for use with patio heaters by the manufacturer.
It goes without saying that you will need plenty of clearance between the top of the heater and the canopy above. If the heater is going to be unused for a longer period of time, for instance over winter, you may want to put it in a garage or shed as further protection from the elements. However, you will need a separate, outdoor storage area for your gas cylinders.
Gas cylinders must never be stored indoors. Whenever you use your gas patio heater, you should make a habit of checking for leaks and damage to the burner, regulator and gas hose. It is also a good idea to check for debris in the burner before lighting the heater. Gas patio heaters should be cleaned with a soft, moist rag. Do not use corrosive or combustible cleaning products to clean your heater.
Gas patio heaters should be serviced every hours of use or once per year, whichever comes first. Services and repair work must be carried out by a qualified gas technician. How are gas patio heaters installed?
Installation DIY Installation One of the great advantages of gas patio heaters is that, unlike electric patio heaters, they can usually be installed DIY. Electric patio heaters have to be wired into the mains, which is a job for a professional electrician, but most gas patio heaters just need assembling and attaching to a gas cylinder. Occasionally, you will find a gas patio heater that specifies that it needs assembling by a qualified gas technician, but this is usually only the case with heaters sold to the trade.
Currently, all our gas patio heaters are suitable for DIY installation. Full information can be found on the product page. Assembly Gas patio heaters are usually easy to assemble, supplied with all fittings, fixtures and a full set of instructions. Most gas patio heaters are also supplied with a gas hose and regulator, although in some cases you will need to purchase these separately. Where this is the case, full guidance on the type of regulator and hose required will be provided in the manual.
Assembly is usually just a case of piecing together the separate parts of the heater frame, fastening them in place with screws and bolts.
Likewise, the reflector and cylinder housing are usually supplied as separate panels that need to be screwed together. If the gas hose is not already connected, you will need to attach it to the burner, run it through the central post and attach it to the regulator in the cylinder chamber. Then you will be ready to attach the gas cylinder and make final checks on the heater before using.
Assembly should require only basic DIY tools: a wrench, screwdriver and pair of pliers. A bottle of soap solution is also useful to help check for leaks. Leak Testing Your gas patio heater and all its components will be fully tested for leaks before it leaves the manufacturing plant. However, to ensure that no damage has occurred during transit, you should thoroughly inspect the entire heater assembly, including hose, regulator, pilot light and burner, before using.
You should check for obvious damage and perform a leak test to make sure no gas is escaping from the heater before it reaches the burner. The best way to check for leaks is with a soap solution, made with one part liquid detergent and one part water. Apply the solution to the heater with a spray bottle, brush or rag.
Open the gas supply to the heater and watch for bubbles. Any bubbles forming in the solution will indicate a leak. If the bubbles form over the connection between the regulator and the hose, or the hose and the cylinder, switch off the gas and tighten all connections. If you continue to see bubbles after all connections have been tightened, it may be your gas hose or cylinder are defective.
Contact your place of purchase for further guidance and do not use the patio heater. Keep your patio heater away from naked flames while leak testing. It goes without saying that you should never smoke while leak testing or operating your patio heater! What maintenance do patio heaters need? Maintenance Gas patio heaters require regular, light maintenance to keep them running smoothly and safely.
Much of this can be done DIY, such as cleaning and checking the patio heater, but a professional will be required to perform annual services and make any repairs. This will help prevent rust and will keep the heater looking its best.
Do not use combustible or corrosive cleaning products on your patio heater. If the gas hose shows any signs of cracking, splitting or is damaged in any other way, it should be replaced like-for-like with a hose of the same length and quality. Most gas patio heaters come supplied with a clip-on propane regulator, but are also suitable for use with other types of gas, such as butane cylinders or propane cylinders with screw-top valves.
You should never replace the regulator with any model other than those specified in the heater manual. If you are in any doubt what kind of regulator can be used with your heater, consult the heater retailer or speak to a qualified gas technician. All things being equal, it is good practice to change the gas hose at least every 5 years and the gas regulator at least every 10 years.
Your heater should be serviced annually or after every hours of use, whichever comes first. This is to ensure your gas assembly is operating safely and efficiently, with no leaks and no risk of carbon monoxide production. The gas technician will remove, examine and clean all safety critical parts of your heater, clearing out any clogging deposits with a wire brush.
If you experience difficulties lighting your heater, you should be able to undertake basic troubleshooting using the advice in the heater manual. Common causes, which include loose connections, debris around the burner and an empty fuel cylinder, are easily remedied and will not require professional expertise. However, you should seek professional assistance if you experience any of the following problems:.
In the event of a gas leak, escaped gases will quickly diffuse away in a well-ventilated area, and are unlikely to cause problems. However, a gas leak in an indoor or improperly ventilated area could have very serious consequences. This is because the gas will start to collect, risking gas inhalation and potentially causing explosions. So, how do you know if your chosen area is adequately ventilated? So, in a square gazebo, at least one wall must be entirely open, to encourage air circulation and the evacuation of any residual gases.
Quite apart from the obvious fire risk, you also risk hampering the efficient flow of heat out from the heater. Most heater manuals will specify the minimum distance which should be maintained between the heater and any combustible materials. Typically, this will be up to cm from the top and sides of the heater. We do not recommend using gas patio heaters under conventional awnings, tents or gazebos. You should only use purpose-built gazebos which specify their suitability for such applications.
The burner can reach high temperatures, so it is important not to place the heater somewhere where it can be easily brushed against or knocked over. It is particularly important that the cylinder and hose assembly is kept out of the way where it will not be subject to accidental damage; the hose should not be trailed across pathways or under chairs.
Do not allow children or pets to play near the heater when it is in operation, and never leave the heater unattended while it is in use. Secure Base A pre-requisite for any gas heater fitting location is a secure, level floor that will provide a firm base for the heater.
Gas heaters are not suitable for use on moving or unsteady floors, and therefore should not be used on vehicles or boats. Many larger patio heaters can be bolted to the ground for extra security. This can be beneficial if you intend to use the heater in the same location every time.
Permanently fitted outdoor heaters will benefit from a protective cover when not in use, to keep surfaces clean and prevent outdoor detritus from settling in the burner. What do gas patio heaters look like? Style Gas patio heaters come in a range of sizes, shapes and colours. Unlike electric patio heaters, which usually have very utilitarian designs intended to be as inconspicuous as possible, gas patio heaters come in a range of tasteful styles designed to fit harmoniously within outdoor design schemes.
Umbrella style patio heaters are elegant yet sturdy with plenty of scope for variation in design. The steel housing is available in a range of shades, from classic stainless steel to garden furniture green, from retro red to discreet black. Pyramid Style Pyramid style gas patio heaters, also known as flame heaters, make the gas burner into an eye-catching feature, with a long flame held within a quartz glass tube.
Flame heaters have an exotic, extroverted feel, reminiscent of Hawaiian beach parties and pool-side bars. This makes them the perfect choice for restaurant terraces, pub gardens and waterfront bars. Looking for a patio heater but not sure where to begin? Use the questions below to become an expert. Got a question for one of our experts? Click the Live Chat window opposite and we will be happy to help. Ready to shop for a gas patio heating solution?
Click here to explore all the options available. Gas Patio Heater Buying Guide. Why choose a gas patio heater? Where can you use a gas patio heater? How often are your evenings outdoors cut short by falling temperatures? Most people can identify with this scenario. The company is excellent, your garden looks beautiful, and you feel you could stay outside for hours. But before long, that pleasant warm breeze has turned frigid. You feel goosebumps gathering on your arms, the conversation begins to falter, and the first person rises to admit defeat and scuttle indoors.
DIY Assembly.
0コメント