If the lens is cracked, you will need to replace the camera. If too many applications are running at the same time, or the phone is overheating due to extended use, it may freeze up. If the touch screen and the volume button are both unresponsive, try waiting minutes for the phone to unfreeze.
Next, quit any unnecessary applications that may be running. If your phone does not unfreeze on its own, remove and reinstall the battery to force the phone to restart. The button may become jammed after repeated use. If gently wiggling the button does not free it, there may an internal problem with the button. If you have dropped the phone or applied too much pressure to the front screen, the digitizer is likely damaged.
In this case, the only fix is to replace the display. When I press the on button, huawei ascend then goes black and then just comes up with android on the screen. Please help!! My phone won't switch on. It will only load the Huawei logo. Is there anything I can do to start the phone Is it the battery, even though the battery is charging Fix Your Stuff Community Store.
Huawei Ascend P6-U06 Troubleshooting. Edit Options History. Battery won't charge. Wall outlet is defective. Charger cable is damaged. Battery is faulty. Micro-USB port is malfunctioning. Phone won't connect to the internet. Phone is set to airplane mode. Area is a dead zone. Earpiece speaker is not putting out sound. Volume is low. Earpiece speaker is faulty. Screen is not displaying properly.
Brightness is all the way down. A better option is to try blowing into the port or using compressed air like dust-off to clean the port. If the problem persists it is possible that the charging port itself or those metal connector pins I mentioned earlier is broken.
If this is the case, you can follow one of the help guides to replace it yourself here: Huawei P6-U06 Repair. Thomas Paine. I just had this problem with a Huawei YA1. An ATT no contract phone. They may not have them anymore I got it Aug , what a deal!.
But the computer did recognize when it was plugged in, and enumerated it, with a beep, and showed the files in the phone memory. So I pried off the back, starting at the USB jack end, and removed the battery for 10 secs, then put it back and replaced the back. I've had similar charging issues with lots of portable mini-USB devices like my Apple 5.
It's often a bad driver in the desktop I guess. I have to re-plug my Apple 5 cord more than once sometimes to get the Apple driver to start charging! Also- NOTE - you have to plug the USB cord into the computer USB port in one push, once it's centered and sliding in, not slowly, assuming the other end is already in the phone- be easy on this small connector, go slow.
This surge of current when the phone is plugged in fast, to the desktop USB port, triggers the USB port to enumerate it. Sometimes slowly plugging it in does not allow the computer to recognize or charge it! Believe it or not! It means that the battery is too low to turn phone on even on the charger.
Let it set for a while. Once icon disappears it will start showing percent again. After a while charges become worn out from bending so much that the inner insulation breaks and the wires short this causes damage to the battery and seems to match your symptoms I say replace that cord.
AerocomRadio aerocomradio. Yes it's Lithium Ion Battery and usually in this case you can charge it anytime low bat full bat. However, sometimes when you are charging from Point of Connection to the Charging Circuitry to the Battery.
Could be a Flex issue or connection issue inside that's if it's a built in battery. However in this case. Usually Lithium Ion batteries last 3 years. I have a Lithium Ion battery that lasted me from - and it's still charging and working. If your charging wire is damaged it may not work properly. It could also lead to dangerous conditions.
A broken or frayed charging wire can be a fire hazard. You could also run the risk of electrocution, of yourself or someone else. If your phone has recently had a software update there is a possibility that it needs to be reset to complete the installation.
If you have checked the phone, the wire, and the wall adapter and it is all in working order, the next step is to check the power supply. Certain applications can drain your battery faster than it can charge. In these cases, it may be helpful to leave your phone off to allow it to charge properly.
Once the phone is off, you can plug the charging wire into the phone. Your Huawei phone should either show a charging icon on the screen, or there will be an indicator light. Having many applications running in the background can drain a battery faster than it can charge. If this is happening, your phone may not charge properly.
Close all the background applications to see if that helps the phone to start charging. There are two primary ways of contacting the company directly. Contacting Huawei will allow you to get information on phone repair, battery replacement, or phone replacement. You can also ask about any warranty that you may have access to. This site uses Akismet to reduce spam.
Learn how your comment data is processed. Pick up the wall adapter and locate the closest outlet to you. Plug the Adapter into the outlet. Ensure that the charging wire is connected to the adapter, and make sure it is plugged into your phone at the other end. Unplug any wires and ensure that your Huawei phone is off. Use a light to check the charging port of your phone for any foreign materials. If you see anything in the charging port, use a round-tip toothpick to gently remove it.
0コメント